Architectural Coatings and Non-Sacrificial Graffiti Products
Enamo Grip ® Clear
Aliphatic polyurethane enamel for low maintenance.
ENAMOGRIP ® CLEAR is a tough, moisture-curing, two-component polyurethane enamel, which produces a uniquely hard and durable coating film. ENAMOGRIP ® CLEAR will demonstrate unsurpassed semi-gloss retention, color retention, and chalk resistance when utilized for exterior coating situations. ENAMOGRIP ® CLEAR will provide outstanding resistance to water and humidity, stains, chemicals, and solvents, as well as tremendous scuff, mar, and impact resistance. Ideal for use on bridges by itself or applied over RUSTGRIP ® or MOIST METAL GRIP ® for complete encapsulation of the metal, providing protection from rust and corrosion for a minimum of 10 years in normal circumstances.
Resistant to hail damage and similar abuses that create opportunities for rust and corrosion, completely UV- controlled and weather-resistant.ENAMOGRIP ® CLEAR is a self-leveling formula for an outstanding finish. ENAMOGRIP ® CLEAR can be used on flooring for a tough, long-wearing surface, but precise measures must be taken to ensure a completely clean surface, free from moisture and residues to adhere to. In summary, the overall toughness, durability, and weather resistance of ENAMOGRIP ® CLEAR polyurethane enamels make them the ideal choice for demanding product applications for architectural maintenance situations that require the utmost in exterior durability. ENAMOGRIP ® CLEAR is an ambient/slow moisture-cure coating.
Features
-
Non-Skid element: The formula of resins will lay out and self-level into a beautiful, evenly spread gloss finish (no brush marks). Even though the coated area looks glossy, the surface is not slippery even when wet, with minor exceptions for some hard shoe soles.
-
Cures by moisture in the air and heat reactivity in 7 - 10 days to full cure
-
Impact Resistance: Front: 160 psi / Back: 100 psi
-
Lead and Chromate Free
-
Tinting: Can be factory tinted any colour with a minimum of 60 gallons ( lower quantities may be available with written approval )
Enamo Grip ® White
For Low Maintenance
ENAMOGRIP ® is a tough, moisture-curing, two-component polyurethane enamel, which produces a uniquely hard and durable coating film. ENAMOGRIP ® will demonstrate unsurpassed semi-gloss retention, color retention, and chalk resistance when utilized for exterior coating situations. ENAMOGRIP ® will provide outstanding resistance to water and humidity, stains, chemicals, and solvents, as well as tremendous scuff, mar, and impact resistance. Ideal for use on bridges by itself or applied over RUSTGRIP ® or MOIST METAL GRIP ® for complete encapsulation of the metal, providing protection from rust and corrosion for a minimum of 20 years in normal circumstances.
Resistant to hail damage and similar abuses that create opportunities for rust and corrosion, completely UV-controlled and weather-resistant.ENAMOGRIP ® is a self-leveling formula for an outstanding finish. ENAMOGRIP ® can be used on flooring for a tough, long-wearing surface, but precise measures must be taken to ensure a completely clean surface, free from moisture and residues to adhere to. In summary, the overall toughness, durability, and weather resistance of ENAMOGRIP ® polyurethane enamels make them the ideal choice for demanding product applications for architectural maintenance situations that require the utmost in exterior durability. ENAMOGRIP ® is an ambient/slow moisture-cure coating.
Graffiti-Proof Resistance
ENAMOGRIP ® Clear is usually used as the topcoat for GRAFFITI PROOFING because it has absolutely no pigments for the graffiti to attach to. The ENAMOGRIP ® in white or light colours may show a slight shadow. Once the ENAMOGRIP ® has cured, applications of spray cans, Magic Markers, and other paints etc. can be wiped off completely with Superior's specially-blended graffiti cleaner. ENAMOGRIP ® can withstand years of graffiti removal as it is not affected by solvents and does not breathe to allow spray paints or oils to penetrate its surface. Keytone, MEK or other solvents may be used to remove graffiti from its surface, provided environmental considerations are not a factor.
Features
-
Non-Skid element: The formula of resins will lay out and self-level into a beautiful, evenly spread gloss finish (no brush marks). Even though the coated area looks glossy, the surface is not slippery even when wet, with minor exceptions for some hard shoe soles.
-
Cures by moisture in the air and heat reactivity in 7 - 10 days to full cure
-
Impact Resistance: Front: 160 psi / Back: 100 psi
-
Lead and Chromate Free
-
Tinting: Can be factory tinted any colour with a minimum of 60 gallons ( lower quantities may be available with written approval ) - otherwise the white base can be tinted locally to mid tones using 844 Series for 2 part polyurethane.
Enamo Grip ® 5000
Aliphatic Polyester Enamel pH 5-14
Enamo Grip 5000 (Polyester) is used as a top coat for colour, UV protection, and industrial strength to guard against chemical splash and acid rain. Can withstand Skyrol fluids used in aircraft when applied to the flooring under the planes. Comes in colours and clear. Never used for underwater.
Limited Warranty
-
Unless Superior Products provides a written warranty of fitness for a particular use, Superior Products' sole warranty is that the product, as supplied, will meet the current sales specifications and is specific only to the return of the product found to be defective upon opening of the container within one year. Customer's exclusive remedy and Superior's sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted, and Superior Products expressly disclaims any liability for incidental or consequential damage.
