Corrosion Products
Lining – Kote Novolac
Acid and Chemical Resistant Coating for All Surfaces
LINING – KOTE NOVOLAC is a two-part pigmented epoxy coating, which will produce a hard, tough coating film.
ADVANTAGES
-
Outstanding resistance to solvents, acids, and alcohols
-
Rapid property development at ambient & low temperatures.
-
Good working life, with cure-speed balance, and
-
NOVOLAC offers abrasion & high-chemical resistance.
NOTE: RUST GRIP ® is not compatible with LINING – KOTE NOVOLAC. MOIST METAL GRIP ® should be used in place of RUST GRIP ® as a primer and applied as directed in MOIST METAL GRIP ®’s application documentation.
Quick Menu
Product Resources
Uses and Certifications
TYPICAL USES:
• As a lining topcoat for acid tanks (three coats required) with a 10-day cure time for both interior and exterior splash
• As a lining topcoat for chemical tanks (three coats required)
• As a lining topcoat for solvent tanks (two coats required)
• As a lining topcoat for ballast tanks (two coats required)
TESTS AND CERTIFICATIONS:
1. USDA Approved
2. Marine Approvals for salt water / maritime use :
- US Coast Guard
- ABS ( American Bureau of Shipping )
- IMO ( International Marine Organization )
3. Abrasion ( ASTM D4060 )
Limited Warranty
Unless Superior Products provides a written warranty of fitness for a particular use, Superior Products' sole warranty is that the product, as supplied, will meet the current sales specifications and is specific only to the return of the product found to be defective upon opening of the container within one year. Customer's exclusive remedy and Superior's sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted, and Superior Products expressly disclaims any liability for incidental or consequential damage.
Lining-Kote UHS
Built to resist the toughest acid, chemical or solvent environments.
LINING KOTE UHS is a two-part pigmented epoxy coating, which will produce a hard, tough coating film.
LINING KOTE UHS has outstanding adhesion and can withstand extreme abrasion. It is resistant to water, humidity and high heat.
LINING KOTE UHS is made with a high molecular weight base and cured for the highest level of chemical resistance.
Typical Uses
-
Superb acid and superior alkali resistance.
-
As a lining topcoat for acid tanks (two coats required) with a 10-day cure time for both interior and exterior splash;
-
As a lining topcoat for chemical tanks (three coats required);
-
As a lining topcoat for solvent tanks (two coats required);
-
As a lining topcoat for ballast tanks (two coats required).
Moist Metal Grip®
Applied to wet metal surfaces
MOIST METAL GRIP ® is a tough adherent, 2 component Epoxy coating, which produces a hard, yet flexible coating film. These epoxy products will demonstrate excellent chemical and solvent resistance when utilized in harsh atmospheres and will also provide outstanding water and humidity resistance. MOIST METAL GRIP ® will adhere tenaciously to a variety of substrates, such as carbon steel ( phosphated or non-phosphated ), wood, and concrete. These products can be utilized in DTM ( direct-to-metal ) applications, with excellent success, as they have been fortified with a very efficient, nontoxic, rust inhibitive pigment.
Limited Warranty
Unless Superior Products provides a written warranty of fitness for a particular use, Superior Product's sole warranty is that the product, as supplied, will meet then current sales specifications and is specific only to return of product found to be defective upon opening of container within one year. Customer's exclusive remedy and Superior's sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted and Superior Products expressly disclaims any liability for incidental or consequential damage.
RustGrip® (Non Slip)
Non Slip for offshore oil rigs and other extreme environments
RUSTGRIP (NS) ® is a one-part polyurethane coating that combines with atmospheric moisture to cure. Upon curing, RUSTGRIP (NS) ® provides a protective coating of superior adhesion, flexibility and abrasion/impact-resistance. It is resistant to chemical solvents and acid splash. Originally designed for metal surfaces, RUSTGRIP (NS) ® demonstrates excellent adhesion to wood, concrete, fiberglass and many other substrates.
RUSTGRIP (NS)® is designed for the encapsulation of and adherence to tightly-bonded surfaces of lead-based and other toxic paints as well as rusted surfaces. This unique ability is accomplished by the curing mechanism of the base polymer. The coating (having a low initial viscosity) wets the surface, then penetrates into the pores of the substrate where curing begins. RUSTGRIP (NS) ® actually becomes part of the substrate unlike a surface coating which just bonds on top. The polymer literally begins to swell, developing an interlocking network between the pores of the surface and the coating. RUSTGRIP (NS) ® is highly recommended as a base coat for SUPERTHERM ®. No pot life, no catalyzation, no two-part mixing. RUSTGRIP (NS) ® is not a sacrificial rust inhibitor such as a zinc enriched primer that will wear out over time but in fact a permanent rust proofing which is why it is a certified ( ASTM E1795 ) Biohazard Encapsulator.
RUSTGRIP (NS) ® has also passed 15,000 hours of salt spray testing which are marine specifications and consequently has achieved DNV certification. Can substitute for zinc-rich primer requiring no white sandblasting. Can be applied over rusted surfaces after loose/flaking material is removed. High humidity quickens the dry / cure cycle.
Surface Coating and RustGrip (NS) Differences
A surface coating does not have the special solvent carrier to allow it to enter the pores of a substrate and carry the body of the coating into the pores with it. The surface coating will bite into anything above the pore area and adhere to the surface by attaching to any roughness. This works well in most areas until the surface of the coating is exposed to weathering and other elements over time allowing oxidation and acid rain to enter through its pin holes and begin the migration of corrosion.
RUST GRIP (NS) ® is made with special solvent carriers that allow the coating to penetrate into the pores carrying the body of the coating with it. Once the body of the coating is in the pores, it begins to absorb the moisture from the atmosphere and gases itself or does a microscopic swell inside the pores that anchors it into the metal or any other surface. This action does allow the coating to become part of the actual surface with is different than all other industrial coatings. Also, its high molecular weight allows the coating to become extremely tough. Being an aromatic urethane in nature, it is already extremely resistant to acids. Its non-leafing metallics allow an encapsulation of the surface and adds additional toughness and UV control to its surface.
Limited Warranty
Unless Superior Products provides a written warranty of fitness for a particular use, Superior Product's sole warranty is that the product, as supplied, will meet the current sales specifications and is specific only to return of product found to be defective upon opening of the container within one year. Customer's exclusive remedy and Superior's sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted and Superior Products expressly disclaims any liability for incidental or consequential damage.
RustGrip® ULVOC
A tough, one-part, moisture-cure polyurethane coating that absorbs atmospheric moisture to cure.
RUST GRIP® ULVOC is loaded with a metallic pigment for strength and is also resistant to chemical solvents and acid splash. Upon curing, RUST GRIP® ULVOC provides a protective coating film of superior adhesion and flexibility and is resistant to abrasion and impact. RUST GRIP® ULVOC can be used as a primer or as a one-coating system. It is patented to encapsulate lead-based paints and other toxic materials, including asbestos.
RUST GRIP® ULVOC can be applied over pressure-washed, completely dry flash rust and firmly bonded commercial paints. In most cases, a white or near-white blasting is not required. A light to medium surface rust is preferred as the profile.
Typical Uses
-
As a coating to encapsulate rust, lead-based paints and other hazardous materials
-
As a protective coating on metal, concrete, wood, etc. to add strength and prevent deterioration
-
As a one-coat system on new or existing bridges, oil platforms, roofs, and other commercial/industrial surfaces with minimal surface preparation and non-sparking
RustGrip
Rust and Biohazard Encapsulation
RUSTGRIP ® is a one-part polyurethane coating that combines with atmospheric moisture to cure. Upon curing, RUSTGRIP ® provides a protective coating of superior adhesion, flexibility and abrasion/impact resistance. It is resistant to chemical solvents and acid splash. Originally designed for metal surfaces, RUSTGRIP ® demonstrates excellent adhesion to wood, concrete, fiberglass and many other substrates.
RUSTGRIP ® is designed for the encapsulation of and adherence to tightly bonded surfaces of lead based and other toxic paints and materials as well as rusted surfaces. This unique ability is accomplished by the curing mechanism of the base polymer.
The coating ( having a low initial viscosity ) wets the rusty surface, then penetrates to the foundation of the rust’s origin where curing begins. RUSTGRIP ® actually becomes part of the substrate unlike a surface coating which just bonds on top. The polymer literally begins to swell, developing an interlocking network between the pores of the surface and the coating. RUSTGRIP is highly recommended as a primer coat for SUPERTHERM ®. No pot life, no catalyzation, no two-part mixing.
RUSTGRIP ® is not a sacrificial rust inhibitor such as a zinc-enriched primer that will wear out over time but in fact a permanent rust proofing which is why it is a certified ( ASTM E1795 ) Biohazard Encapsulator. RUSTGRIP ® has also passed 15,000 hours of salt spray testing, which far exceeds the marine specifications and consequently has achieved DNV certification. Can substitute for zinc-rich primer requiring no white sandblasting. Can be applied over rusted surfaces after loose / flaking material is removed. High humidity quickens dry / cure cycle.
Using RUSTGRIP ® is approximately 77% Less Expensive than a traditional 3-Part System!
Product Resources
Physical Data
-
Solids: By weight 62.2% / By Volume 51.4%
-
Cure time at 70°F (21°C): 2 hours to touch. Overcoat with RUSTGRIP ® or other coatings immediately after surface is dry to the touch to achieve proper adhesion. Higher temperatures and humidity will shorten cure times, lower temperatures will slow curing. Must be overcoated within 2 hours or within 1 hour after reaching the dry-to-touch stage, or the surface must be lightly sanded to achieve good adhesion.
-
Lead and Chromate free
-
Cures by reacting to moisture in the air
-
Weight: 9.18 lbs. per gallon
-
Surface Tensile Strength: 6,780+ psi
-
VOC Level: 3.17 lbs/gal ; 380 grams/liter
-
Impact Resistance: 200+ psi front/160+ psi back
-
Shelf Life: up to 3 years (unopened) under appropriate storage conditions (see MSDS)
Features
-
USDA approved, (safe around food) Lead & chromate free
-
Patented Biohazard Encapsulation (ASTM E1795)
-
Outstanding Adhesion (ASTM D3359) Coated over 18 coats of oil based paint, penetrating through all 18 coats and secured to the substrate
-
6,750 psi Tensile strength equal to US highway concrete in strength
-
Performed 20,000 Window Cycling tests equal to 54 years
-
Not affected by acid splash
-
Guards against all types of corrosion
-
Was subjected to - 350°F degrees nitrogen at Air Products Co. without effect
-
Can withstand + 325°F degrees constant heat before the resins burn out
Limited Warranty
Unless Superior Products provides a written warranty of fitness for a particular use, Superior Product's sole warranty is that the product, as supplied, will meet then current sales specifications and is specific only to return of product found to be defective upon opening of container within one year. Customer's exclusive remedy and Superior's sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted and Superior Products expressly disclaims any liability for incidental or consequential damage.
